How is it most reasonable to fill the grouting layer during installation using the grouting method? How thick should it be poured? Thank you.
Thread Content
As the title suggests, what is the most reasonable way to fill the grouting layer during installation using the grouting method? How thick should it be poured? Thank you.
For the installation of the pump in the project, holes for foot bolts are pre-drilled. Since the size of these pre-drilled holes is large, during the first grouting operation, the grouting level must not be lower than the surface of the foundation; thereafter, a flat washer is placed on the grouted surface, and it is leveled by gently tapping it with a hammer. Once the strength of the grouting layer is sufficient, formal leveling can be carried out. I’m not sure if this is the answer you need
The specific construction plans all include relevant requirements
Let’s clear up any doubts for those who need to know: according to available data, a thickness of 30–50 mm is appropriate for the bedding slurry.