【Daily Question】Chemical Engineering Principles 263: Turbulent Flow (December 14)
Thread Content
This post was last edited by “Back to Cambridge” on December 24, 2015, at 13:39. Starting today, the Chemical Engineering Theory section is launching the “Question of the Day” activity, aimed at helping everyone reinforce their basic knowledge in chemical engineering. Subsequently, series such as “Fundamentals of Chemical Engineering”, “Mass Transfer and Separation”, “Chemical Thermodynamics”, and “Chemical Process Technology” will be introduced. We hope for your active support! For replies to the “Question of the Day” activity, answers can be viewed directly; however, the thread will be closed after one day! ! Participation earns 3 wealth points, with an additional 3 wealth points for correct answers~~ Short answer question: When a fluid flows turbulently inside a pipe, from the center to the wall it can ________.___________._________________. Laminar flow, transitional flow, and turbulent flow
When a fluid flows turbulently inside a pipe, from the center to the wall, it can be divided into a turbulent layer, a buffer layer, and a laminar layer
When a fluid flows turbulently within a pipe, from the center to the wall it can go through ___laminar flow_______, ___transitional flow________, and finally ___turbulent flow_____________.
Turbulent core layer, buffer layer (transition layer), laminar sublayer.
When a fluid flows turbulently inside a pipe, the flow from the center to the wall can be laminar, transitional, or turbulent.
It is divided into three layers: the turbulent core layer, the buffer layer/transition layer, and the laminar bottom layer
When a fluid flows turbulently inside a pipe, from the center to the wall it can be __laminar flow________, ___stagnant flow________, or ___turbulent flow______.