How to clean ceramic Lassie rings with dimensions 3×3×5?
Thread Content
Guys, how do I clean ceramic Lasi rings with dimensions of 3×3×5? Planned to use it as zeolite
What device is it, and what medium is attached to it?
I’m not sure, so I plan to wash it; I’m worried it might contaminate the oil
It was originally used in glass distillation columns
We usually use high-pressure cleaning guns
Uh, this laboratory doesn’t have it :(
There is no need to take it out and wash it inside the tower; just clean it using ethanol under full reflux. If it is taken out, it is also cleaned by soaking in ethanol; this is generally used in laboratories in small quantities.
Well, I just clean it with ethanol and then dry it; I’ll see how it works in the next couple of days.
Generally, it is just cleaned with organic solvents and subjected to ultrasound, which is thought to yield better results
This post was last edited by Wild Wolf on 2016-1-5 at 19:50. Well, I first perform an ultrasonic treatment, then wash it with water, followed by washing it with ethanol. After that, it’s dried in an oven, and finally heated in a muffle furnace at 200°C :handshake