Tower washing
Thread Content
What is the phenomenon of water carryover in the isobutane removal column and the n-butane removal column, and how should it be addressed?
Civilization, after all this time, have you still not learned how to post? Describe the problem clearly! What device? What is the water capacity? What does the title “Tower Cleaning” mean?
In the case of alkylation units, it is necessary to check whether there are leaks in the water removal tower system. Assuming that the tower system is functioning properly, pay attention to the actual liquid level in the wash tank as well as the volume of water circulating in the system; an increase in the water circulation volume is a major contributing factor. Provided that your tower system is working properly
In the case of alkylation units, it is necessary to check whether there are leaks in the water removal tower system. Assuming that the tower system is functioning properly, pay attention to the actual liquid level in the wash tank as well as the volume of water circulating in the system; an increase in the water circulation volume is a major contributing factor. Provided that your tower system is working properly
It is recommended that you appropriately reduce the opening of the outlet valve of your wash cycle pump in order to decrease the circulation volume.
For water in the tower top, first rule out leaks in the tower top condenser; second, control the interface of the washing tank by operating at a slightly lower liquid level.