Flue gas desulfurization tower: Calculated based on water consumption?
Thread Content
Flue gas desulfurization tower: Calculated based on water consumption? Given the flue gas flow rate and temperature, determine the temperature of the flue gas after desulfurization to be 50 degrees. How to calculate water usage! ! !
It can’t be generalized; it should be related to the moisture content in the flue gas. The amount of heat that causes phase change of the water needs to be calculated based on the temperature at the flue gas outlet, as well as an estimate of the amount of water vapor that can be carried away. Adding them together gives an approximate amount of water usage
The estimation is made assuming a relative humidity of 100% in the flue gas under the emission conditions；
There are not enough parameters; there is no information on the humidity (or moisture content) of the original flue gas, so how can it be calculated? The air enthalpy-humidity diagram can be used as a reference for estimation.
The parameters are too one-sided; is temperature the only parameter for the exhaust flue gas?