How to measure the groove angle of the welding inspection ruler.
Thread Content
I don’t know how to measure angles, so please let me know.
To measure the groove angle of the welding inspection ruler, you can use an angle measuring tool. The following is a commonly used method.: 1. Prepare the required tools: Angle measuring tools (such as angle gauges or angle sensors), magnetic bases and welding inspection rulers. 2. Fix the magnetic base on the welded inspection ruler and ensure that the base is firmly connected to the inspection ruler. 3. Place the angle measurement tool on the magnetic base, making sure the tool is vertically aligned with the inspection ruler. 4. Use the graticule or numeric display on the angle measurement tool to read the angle of the bevel. Make sure measurements are read and recorded accurately. Please note that before taking measurements, make sure the surface of the welding inspection ruler is clean so that the bevel angle can be measured correctly. At the same time, operators should be familiar with and follow relevant safety operating procedures and pay attention to safety when using tools. .
The welding inspection ruler can measure the groove angle, weld height, weld gap, undercut depth, etc. There should be instructions for use in the inspection ruler packaging box.
Looking at the manual, there are many people who use this thing, but it is basically not commonly used. If you learn it 10 times, you will forget it 10 times. Angle and other things are all visual inspection, which is almost enough. Unless there is any doubt in the visual inspection, it needs to be measured in detail. If there is a dispute, it will need to be measured by a third party.