Valve size issue
Thread Content
I would like to ask the experts: Are valve sizes based on universal standards? The valve models are the same across all manufacturers, but are the dimensions the same? For example, for pneumatic on-off valves with a diameter of DN150, pressure rating of PN16, and made of 304 material, is the size of their valve body the same as that of the Q41H-16P (DN150/304) valve body?
The size of a valve, that is, its structural length, is **standardized**. However, regarding whether the length of the pneumatic on-off valve you are referring to is the same as that of the Q41H-16P ball valve, there is one missing prerequisite: it is not clear whether the pneumatic on-off valve in question is of the pneumatic ball valve type or the pneumatic globe valve type. If it is a pneumatic ball valve, then according to the standards, its structural length will be the same as that of the Q41H-16P ball valve. On the other hand, if it is a pneumatic switch globe valve, the situation is different. This standard can be found; our company’s product catalog contains tables with the parameter dimensions of most common valves for reference. If you need any assistance, feel free to contact me via WeChat at 15251600084
More or less is fine; the key is to have a space where it can be installed. Length doesn’t matter, but the direction of the handwheel and the die need to be taken into consideration.