Double-isolation-sleeve magnetic submersible pump
Thread Content
How much does a magnetic submersible pump with dual isolation sleeves cost, and how long can it operate continuously?
Liquid chlorine: from -30 to 45 degrees Celsius; the maximum pressure corresponds to the saturated vapor pressure of liquid chlorine at 45°C. A head of 20 meters is more than sufficient, with a maximum flow rate of 20 cubic meters per hour.
How long it can be used depends mainly on the level of the manufacturer and the on-site operations. It will break down in no time if it operates without liquid. How to talk about lifespan
It is said on the internet that this type of pump can operate for a long time; it has a tank – have you used one before?
I’m not familiar with double isolation sleeves. We have two submersible magnetic pumps for liquid chlorine; we need to inquire about their prices as well as their service life. As mentioned on the 4th floor, the medium used must be clean, as impurities can easily cause blockages.
Double-layer isolation sleeves have been developed by many manufacturers of magnetic pumps; this represents an advancement in terms of manufacturing technology. However, they require monitoring for leaks or uneven wear. In my opinion, it is a fragile design that demands strict adherence to specific operating conditions and maintenance procedures, as any carelessness can lead to damage. However, the technology is not yet mature enough, so its use is limited
Please let me know the specific medium, flow rate, head, etc.
20 cubic meters per hour, head 20