Issues with flow rate of the new hydrogen compressor; those interested, please proceed
Thread Content
I noticed something interesting: I tested two sets of equipment, and in both cases the inlet flow rate to the new hydrogen compressor increased after compression. In our system, the pressure is 14.5 MPA; the inlet flow rate is 42,000 cubic meters, while the outlet flow rate is 47,000 cubic meters. The new hydrogen compressor features a stepless flow control system. There’s also a medium-pressure hydrogenation unit, with an inlet flow rate of 11,000 cubic meters and an outlet flow rate of 18,000 cubic meters. There are valves at various stages as well. Those who are interested can check their own equipment to see if they understand which formula should be used for calculations
The system displays the values converted to standard conditions; as the outlet temperature increases, the displayed value is slightly higher
What was said on the second floor is correct – it’s all converted to flow rates at standard conditions, and the outlet temperature is high.
But has the actual amount changed or not?