Please explain the meanings and adjustments of T1, T2, and T3 in the 8-1-3 mode of PSA hydrogen purification
Thread Content
Could you please explain the meanings and adjustments of T1, T2, and T3 in the 8-1-3 mode of PSA hydrogen purification? Is there a specific formula for calculating the total adsorption time for Tower A? For example, if T1 is 20 seconds and T2 is 30 seconds, I would appreciate some guidance from those with more experience
T1, T2, T3 are the adsorption, desorption, and pressurization cycles
I just created the timing table; in 8-1-3, there should be no T3. It would be best to provide the timing chart from your PSA operation manual, so that others can help you with it
Is it from Tianyi or Huaxi? Ask them for the timeline chart, which shows the steps corresponding to T1, T2, T3 – it’s easy to understand at a glance. Adjusting the K value should result in a change in T2. Generally, T3 refers to the switching time of the programmable valve, which is 2–4 seconds; it should remain unchanged as much as possible. If voltage equalization is achieved, T1 can be adjusted.