Steel frame for tower equipment
Thread Content
Is there software for calculating steel frames? There is a current distillation tower that is 20 meters tall, and a tower frame needs to be designed. The tower has 7 layers from bottom to top; the tower body and some equipment are fixed to the ground. The second-floor platform can bear a load of 1 ton, while the top floor platform can bear a total load of 8.5 tons. The heights of the tower floors are 4 meters, 6.5 meters, 10 meters, 13 meters, 18 meters, and 22 meters respectively. The tower placement area is 5 meters * 5 meters. How is the tower column calculated?
Do you need the tower ladder and platform? I haven’t seen the steel frame you mentioned. The design of the ladder platform can refer to HG_21543-2009---General drawings for circular tower platforms.
I'm referring to the steel frame. The entire system consists not only of towers but also other equipment; some of these devices are located on the highest levels, while others are on the middle levels. The steel frame is the framework of the entire system, including beams, columns, etc.
Well, then you can refer to the steel structures section in the Comprehensive Book of Chemical Equipment. I haven’t done it either, so I can’t help you.
This has to be handed over to the civil engineering team: lol