Parameters of the slag breaker in the water-cooled wall gasifier
Thread Content
There are no refractory bricks in water-cooled wall gasifiers; what values should be used for crushing strength and maximum torque when selecting a slag crusher?
When selecting a slag breaker for a water-cooled wall gasifier, the parameters of crushing strength and maximum torque need to be determined based on specific operating conditions and the physical properties of the slag. Generally, factors such as the hardness and particle size of the slag, as well as the production volume, need to be considered. It is recommended to consult with equipment suppliers to confirm specific requirements, or to refer to actual application data from similar projects when making a selection. .
Do a crushing strength of 145 tons and a maximum torque of 15,000 NM meet the requirements for use?
Parameters such as a crushing strength of 145 tons and a maximum torque of 15,000 Nm can meet the requirements of industrial slag crushers in many cases, especially when dealing with hard or large pieces of slag. However, whether it actually meets the requirements for use in water-cooled wall gasifiers depends on the specific properties of the slag (such as viscosity, temperature, chemical composition, etc.) and the specific requirements of the production environment. It is recommended to conduct a detailed technical analysis or carry out actual equipment testing to ensure that the equipment can meet all operating conditions. If possible, it is also very necessary to confirm further with the equipment manufacturer. .