High condenser outlet temperature
Thread Content
The temperature at the outlet of the sulfur condenser after the sulfur production furnace is 247°C. Could everyone help analyze the reasons for this and suggest any effective solutions? ?
What is the steam pressure of the waste boiler? What are the normal values?
0.35MPa, normal around 160
247 is the invalid outlet temperature. It is within the normal range. Your sulfur cooling should be first-grade sulfur cooling. Lower the pressure control, and the temperature will drop
I can discuss the startup of sulfur recovery; ?I
It produces 0.35 MPa of steam, not 1.0
Sometimes it can drop down to around 180°C, which is quite strange
247 degrees is the temperature at which about 40 kilograms of scrap metal are produced. Your method fails to lower the temperature of the process gas using sulfur. Is it blocked? This results in a reduction in the heat exchange area. Or there is a leak in the heat exchange of the equipment.
The device is leaking; the temperature should drop, and when it’s blocked the pressure drop should increase, but everything is normal